ISO 13485 for 3D Printing: Medical Device Compliance, Explained for Distributors
ISO 13485 is the quality management standard for medical devices. When a distributor sells 3D printers or printed parts into medical, dental or surgical work, understanding 13485, ISO 14971 risk manag
How to Become a 3D Printer Distributor
Step-by-step guide to launching a 3D printer distribution business: OEM selection, legal setup, initial investment, inventory planning, pricing, and channel.
IDEX and Dual Extrusion 3D Printers: What Distributors Need to Know About Multi-Material Printing in 2026
IDEX and dual extrusion 3D printers explained for distributors: how independent dual extruders work, real business case for soluble supports and.
IDEX 3D Printer Farm Economics, The Throughput and Uptime Case That Beats the Spec Sheet
Independent dual extrusion is a capacity purchase, not a colour feature. The purge-tower math, toolhead fault isolation, and the four metrics that prove a duplex tier pays back.
Incoterms 2020, Free-on-Board vs CIF vs DDP for 3D Printer Imports
Incoterms determine who pays for freight, insurance and customs — and who carries the risk at every leg of a 3D printer shipment. A distributor's decision guide to EXW, FOB, CFR, CIF and DDP in the 20
GDPR & Data Protection, Data Compliance Rules for Connected 3D Printers in Europe
A connected 3D printer is a data-processing device as much as a machine. It holds user accounts, print-job history, telemetry and, on many models, a camera feed. Selling that machine into the EU makes
GD&T & Tolerance Stack-Up for 3D Printed Parts, Reading a Drawing Before You Print
A 3D printed part is only as good as the drawing it was built to. This guide explains how geometric dimensioning and tolerancing (GD&T) applies to additive manufacturing, how to read datums and fe
H-Bot vs CoreXY 3D Printer Kinematics: The Distributor's Complete Motion System Guide
H-Bot and CoreXY both use two stationary motors to drive a lightweight gantry — but they are not the same. This distributor's guide explains the racking.
Flame-Retardant 3D Printing Materials, UL 94 Ratings for Distributors
Not every 'FR' filament is the same. UL 94 ranks plastics from HB to V-0 and 5VA, and the rating changes what a printed part can be used for in railway, aerospace and electrical enclosures. A distribu
Flexible Filaments for 3D Printing: TPU, TPE & TPC, A Distributor's Complete Material Strategy
Flexible filaments represent a $380M market segment with 35-55% distributor margins. This guide covers TPU, TPE, and TPC materials — shore hardness.
